Diferencia entre revisiones de «Mikrotik RouterBoard 750»

Revisión de 09:10 7 feb 2011

Este artículo necesita desarrollarse más. Ampliándolo ayudarás a mejorar Guifi.net.
Tal vez puedas ayudarte con los wikis catalán, o inglés si tienen una página equivalente.

Configuración por defecto

   #| ether1 is renamed ether1-gateway, rest of interfaces are switched
   #| IP address 192.168.88.1/24 is on switch
   #| DHCP client is on ether1-gateway
   #| DHCP server is on switch, with address pool 192.168.88.10-192.168.88.254
   #| masquerade on ether1-gateway
   :global action
   
   # these commands are executed after installation or configuration reset
   :if ($action = "apply") do={
       /interface set ether1 name=ether1-gateway
       /interface set ether2 name=ether2-local-master
       /interface set ether3 name=ether3-local-slave
       /interface set ether4 name=ether4-local-slave
       /interface set ether5 name=ether5-local-slave
   
       /interface ethernet set ether3-local-slave master-port=ether2-local-master
       /interface ethernet set ether4-local-slave master-port=ether2-local-master
       /interface ethernet set ether5-local-slave master-port=ether2-local-master
   
       /ip address add address=192.168.88.1/24 interface=ether2-local-master comment="default configuration"
   
       :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={
           /ip dhcp-client add interface=ether1-gateway disabled=no comment="default configuration";
           /ip pool add name=default-dhcp ranges=192.168.88.10-192.168.88.254;
           /ip dhcp-server add name=default address-pool=default-dhcp interface=ether2-local-master disabled=no;
           /ip dhcp-server network add address=192.168.88.0/24 gateway=192.168.88.1 dns-server=192.168.88.1 comment="default configuration";
       }
   
       /ip firewall {
           filter add chain=input action=accept protocol=icmp comment="default configuration"
           filter add chain=input action=accept connection-state=established in-interface=ether1-gateway comment="default configuration"
           filter add chain=input action=accept connection-state=related in-interface=ether1-gateway comment="default configuration"
           filter add chain=input action=drop in-interface=ether1-gateway comment="default configuration"
           nat add chain=srcnat out-interface=ether1-gateway action=masquerade comment="default configuration"
       }
   
       /ip dns {
   	    set allow-remote-requests=yes
   	    static add name=router address=192.168.88.1
       }
   
       /tool mac-server remove [find]
       /tool mac-server add interface=ether2-local-master disabled=no
       /tool mac-server add interface=ether3-local-slave disabled=no
       /tool mac-server add interface=ether4-local-slave disabled=no
       /tool mac-server add interface=ether5-local-slave disabled=no
   
       /tool mac-server mac-winbox disable [find]
       /tool mac-server mac-winbox add interface=ether2-local-master disabled=no
       /tool mac-server mac-winbox add interface=ether3-local-slave disabled=no
       /tool mac-server mac-winbox add interface=ether4-local-slave disabled=no
       /tool mac-server mac-winbox add interface=ether5-local-slave disabled=no
   
       /ip neighbor discovery set [find name=ether1-gateway] discover=no
   }
   
   # these commands are executed if user requests to remove default configuration
   :if ($action = "revert") do={
       /ip firewall {
           :local o [nat find comment="default configuration"]
           :if ([:len $o] != 0) do={ nat remove $o }
   
           :local o [filter find comment="default configuration"]
           :if ([:len $o] != 0) do={ filter remove $o }
       }
   
       :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={
           :local o [/ip dhcp-server network find comment="default configuration"]
           :if ([:len $o] != 0) do={ /ip dhcp-server network remove $o }
   
           :local o [/ip dhcp-server find name="default" address-pool="default-dhcp" interface=ether2-local-master !disabled]
           :if ([:len $o] != 0) do={ /ip dhcp-server remove $o }
   
           /ip pool {
               :local o [find name=default-dhcp ranges=192.168.88.10-192.168.88.254]
               :if ([:len $o] != 0) do={ remove $o }
           }
   
           :local o [/ip dhcp-client find comment="default configuration"]
           :if ([:len $o] != 0) do={ /ip dhcp-client remove $o }
       }
   
       /ip dns {
       	set allow-remote-requests=no
           :local o [static find name=router address=192.168.88.1]
           :if ([:len $o] != 0) do={ static remove $o }
       }
   
       /ip address {
           :local o [find comment="default configuration"]
           :if ([:len $o] != 0) do={ remove $o }
       }
   
       /tool mac-server remove [find]
       /tool mac-server add interface=all disabled=no
   
       /tool mac-server mac-winbox remove [find interface!=all]
       /tool mac-server mac-winbox set [find] disabled=no 
   
       /ip neighbor discovery set [find name=ether1-gateway] discover=yes
   
       /interface ethernet set ether3-local-slave master-port=none
       /interface ethernet set ether4-local-slave master-port=none
       /interface ethernet set ether5-local-slave master-port=none
   
       /interface set ether1-gateway name=ether1
       /interface set ether2-local-master name=ether2
       /interface set ether3-local-slave name=ether3
       /interface set ether4-local-slave name=ether4
       /interface set ether5-local-slave name=ether5
   }