Diferencia entre revisiones de «Mikrotik RouterBoard 750»

De Guifi.net - Wiki Hispano

(primeros pasos)
 
(primeros pasos)
Línea 1: Línea 1:
 
 
== Configuración por defecto ==
 
== Configuración por defecto ==
<nowiki>#| ether1 is renamed ether1-gateway, rest of interfaces are switched
+
    #| ether1 is renamed ether1-gateway, rest of interfaces are switched
#| IP address 192.168.88.1/24 is on switch
+
    #| IP address 192.168.88.1/24 is on switch
#| DHCP client is on ether1-gateway
+
    #| DHCP client is on ether1-gateway
#| DHCP server is on switch, with address pool 192.168.88.10-192.168.88.254
+
    #| DHCP server is on switch, with address pool 192.168.88.10-192.168.88.254
#| masquerade on ether1-gateway
+
    #| masquerade on ether1-gateway
:global action
+
    :global action
 
+
   
# these commands are executed after installation or configuration reset
+
    # these commands are executed after installation or configuration reset
:if ($action = "apply") do={
+
    :if ($action = "apply") do={
    /interface set ether1 name=ether1-gateway
+
        /interface set ether1 name=ether1-gateway
    /interface set ether2 name=ether2-local-master
+
        /interface set ether2 name=ether2-local-master
    /interface set ether3 name=ether3-local-slave
+
        /interface set ether3 name=ether3-local-slave
    /interface set ether4 name=ether4-local-slave
+
        /interface set ether4 name=ether4-local-slave
    /interface set ether5 name=ether5-local-slave
+
        /interface set ether5 name=ether5-local-slave
 
+
      
     /interface ethernet set ether3-local-slave master-port=ether2-local-master
+
        /interface ethernet set ether3-local-slave master-port=ether2-local-master
    /interface ethernet set ether4-local-slave master-port=ether2-local-master
+
        /interface ethernet set ether4-local-slave master-port=ether2-local-master
    /interface ethernet set ether5-local-slave master-port=ether2-local-master
+
        /interface ethernet set ether5-local-slave master-port=ether2-local-master
 
+
      
     /ip address add address=192.168.88.1/24 interface=ether2-local-master comment="default configuration"
+
        /ip address add address=192.168.88.1/24 interface=ether2-local-master comment="default configuration"
 
+
      
     :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={
+
        :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={
        /ip dhcp-client add interface=ether1-gateway disabled=no comment="default configuration";
+
            /ip dhcp-client add interface=ether1-gateway disabled=no comment="default configuration";
        /ip pool add name=default-dhcp ranges=192.168.88.10-192.168.88.254;
+
            /ip pool add name=default-dhcp ranges=192.168.88.10-192.168.88.254;
        /ip dhcp-server add name=default address-pool=default-dhcp interface=ether2-local-master disabled=no;
+
            /ip dhcp-server add name=default address-pool=default-dhcp interface=ether2-local-master disabled=no;
        /ip dhcp-server network add address=192.168.88.0/24 gateway=192.168.88.1 dns-server=192.168.88.1 comment="default configuration";
+
            /ip dhcp-server network add address=192.168.88.0/24 gateway=192.168.88.1 dns-server=192.168.88.1 comment="default configuration";
 +
        }
 +
   
 +
        /ip firewall {
 +
            filter add chain=input action=accept protocol=icmp comment="default configuration"
 +
            filter add chain=input action=accept connection-state=established in-interface=ether1-gateway comment="default configuration"
 +
            filter add chain=input action=accept connection-state=related in-interface=ether1-gateway comment="default configuration"
 +
            filter add chain=input action=drop in-interface=ether1-gateway comment="default configuration"
 +
            nat add chain=srcnat out-interface=ether1-gateway action=masquerade comment="default configuration"
 +
        }
 +
   
 +
        /ip dns {
 +
        set allow-remote-requests=yes
 +
        static add name=router address=192.168.88.1
 +
        }
 +
   
 +
        /tool mac-server remove [find]
 +
        /tool mac-server add interface=ether2-local-master disabled=no
 +
        /tool mac-server add interface=ether3-local-slave disabled=no
 +
        /tool mac-server add interface=ether4-local-slave disabled=no
 +
        /tool mac-server add interface=ether5-local-slave disabled=no
 +
   
 +
        /tool mac-server mac-winbox disable [find]
 +
        /tool mac-server mac-winbox add interface=ether2-local-master disabled=no
 +
        /tool mac-server mac-winbox add interface=ether3-local-slave disabled=no
 +
        /tool mac-server mac-winbox add interface=ether4-local-slave disabled=no
 +
        /tool mac-server mac-winbox add interface=ether5-local-slave disabled=no
 +
   
 +
        /ip neighbor discovery set [find name=ether1-gateway] discover=no
 
     }
 
     }
 
+
      
     /ip firewall {
+
     # these commands are executed if user requests to remove default configuration
    filter add chain=input action=accept protocol=icmp comment="default configuration"
+
    :if ($action = "revert") do={
filter add chain=input action=accept connection-state=established in-interface=ether1-gateway comment="default configuration"
+
        /ip firewall {
filter add chain=input action=accept connection-state=related in-interface=ether1-gateway comment="default configuration"
+
            :local o [nat find comment="default configuration"]
filter add chain=input action=drop in-interface=ether1-gateway comment="default configuration"
+
            :if ([:len $o] != 0) do={ nat remove $o }
        nat add chain=srcnat out-interface=ether1-gateway action=masquerade comment="default configuration"
+
   
     }
+
            :local o [filter find comment="default configuration"]
 
+
            :if ([:len $o] != 0) do={ filter remove $o }
    /ip dns {
+
        }
    set allow-remote-requests=yes
+
      
    static add name=router address=192.168.88.1
+
        :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={
    }
+
            :local o [/ip dhcp-server network find comment="default configuration"]
 
+
            :if ([:len $o] != 0) do={ /ip dhcp-server network remove $o }
    /tool mac-server remove [find]
+
   
    /tool mac-server add interface=ether2-local-master disabled=no
+
            :local o [/ip dhcp-server find name="default" address-pool="default-dhcp" interface=ether2-local-master !disabled]
    /tool mac-server add interface=ether3-local-slave disabled=no
+
            :if ([:len $o] != 0) do={ /ip dhcp-server remove $o }
    /tool mac-server add interface=ether4-local-slave disabled=no
+
   
    /tool mac-server add interface=ether5-local-slave disabled=no
+
            /ip pool {
 
+
                :local o [find name=default-dhcp ranges=192.168.88.10-192.168.88.254]
    /tool mac-server mac-winbox disable [find]
+
                :if ([:len $o] != 0) do={ remove $o }
    /tool mac-server mac-winbox add interface=ether2-local-master disabled=no
+
            }
    /tool mac-server mac-winbox add interface=ether3-local-slave disabled=no
+
   
    /tool mac-server mac-winbox add interface=ether4-local-slave disabled=no
+
            :local o [/ip dhcp-client find comment="default configuration"]
    /tool mac-server mac-winbox add interface=ether5-local-slave disabled=no
+
            :if ([:len $o] != 0) do={ /ip dhcp-client remove $o }
 
+
        }
    /ip neighbor discovery set [find name=ether1-gateway] discover=no
+
   
}
+
        /ip dns {
 
+
        set allow-remote-requests=no
# these commands are executed if user requests to remove default configuration
+
            :local o [static find name=router address=192.168.88.1]
:if ($action = "revert") do={
+
            :if ([:len $o] != 0) do={ static remove $o }
    /ip firewall {
+
        }
        :local o [nat find comment="default configuration"]
+
   
        :if ([:len $o] != 0) do={ nat remove $o }
+
        /ip address {
 
+
            :local o [find comment="default configuration"]
        :local o [filter find comment="default configuration"]
+
        :if ([:len $o] != 0) do={ filter remove $o }
+
    }
+
 
+
     :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={
+
        :local o [/ip dhcp-server network find comment="default configuration"]
+
        :if ([:len $o] != 0) do={ /ip dhcp-server network remove $o }
+
 
+
        :local o [/ip dhcp-server find name="default" address-pool="default-dhcp" interface=ether2-local-master !disabled]
+
        :if ([:len $o] != 0) do={ /ip dhcp-server remove $o }
+
 
+
        /ip pool {
+
            :local o [find name=default-dhcp ranges=192.168.88.10-192.168.88.254]
+
 
             :if ([:len $o] != 0) do={ remove $o }
 
             :if ([:len $o] != 0) do={ remove $o }
 
         }
 
         }
 
+
   
         :local o [/ip dhcp-client find comment="default configuration"]
+
         /tool mac-server remove [find]
         :if ([:len $o] != 0) do={ /ip dhcp-client remove $o }
+
        /tool mac-server add interface=all disabled=no
     }
+
   
 
+
        /tool mac-server mac-winbox remove [find interface!=all]
    /ip dns {
+
         /tool mac-server mac-winbox set [find] disabled=no
    set allow-remote-requests=no
+
   
         :local o [static find name=router address=192.168.88.1]
+
        /ip neighbor discovery set [find name=ether1-gateway] discover=yes
         :if ([:len $o] != 0) do={ static remove $o }
+
      
     }
+
        /interface ethernet set ether3-local-slave master-port=none
 
+
         /interface ethernet set ether4-local-slave master-port=none
    /ip address {
+
         /interface ethernet set ether5-local-slave master-port=none
         :local o [find comment="default configuration"]
+
      
         :if ([:len $o] != 0) do={ remove $o }
+
        /interface set ether1-gateway name=ether1
 +
        /interface set ether2-local-master name=ether2
 +
         /interface set ether3-local-slave name=ether3
 +
         /interface set ether4-local-slave name=ether4
 +
        /interface set ether5-local-slave name=ether5
 
     }
 
     }
 
    /tool mac-server remove [find]
 
    /tool mac-server add interface=all disabled=no
 
 
    /tool mac-server mac-winbox remove [find interface!=all]
 
    /tool mac-server mac-winbox set [find] disabled=no
 
 
    /ip neighbor discovery set [find name=ether1-gateway] discover=yes
 
 
    /interface ethernet set ether3-local-slave master-port=none
 
    /interface ethernet set ether4-local-slave master-port=none
 
    /interface ethernet set ether5-local-slave master-port=none
 
 
    /interface set ether1-gateway name=ether1
 
    /interface set ether2-local-master name=ether2
 
    /interface set ether3-local-slave name=ether3
 
    /interface set ether4-local-slave name=ether4
 
    /interface set ether5-local-slave name=ether5
 
}
 
</nowiki>
 

Revisión de 22:13 2 ene 2011

Configuración por defecto

   #| ether1 is renamed ether1-gateway, rest of interfaces are switched
   #| IP address 192.168.88.1/24 is on switch
   #| DHCP client is on ether1-gateway
   #| DHCP server is on switch, with address pool 192.168.88.10-192.168.88.254
   #| masquerade on ether1-gateway
   :global action
   
   # these commands are executed after installation or configuration reset
   :if ($action = "apply") do={
       /interface set ether1 name=ether1-gateway
       /interface set ether2 name=ether2-local-master
       /interface set ether3 name=ether3-local-slave
       /interface set ether4 name=ether4-local-slave
       /interface set ether5 name=ether5-local-slave
   
       /interface ethernet set ether3-local-slave master-port=ether2-local-master
       /interface ethernet set ether4-local-slave master-port=ether2-local-master
       /interface ethernet set ether5-local-slave master-port=ether2-local-master
   
       /ip address add address=192.168.88.1/24 interface=ether2-local-master comment="default configuration"
   
       :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={
           /ip dhcp-client add interface=ether1-gateway disabled=no comment="default configuration";
           /ip pool add name=default-dhcp ranges=192.168.88.10-192.168.88.254;
           /ip dhcp-server add name=default address-pool=default-dhcp interface=ether2-local-master disabled=no;
           /ip dhcp-server network add address=192.168.88.0/24 gateway=192.168.88.1 dns-server=192.168.88.1 comment="default configuration";
       }
   
       /ip firewall {
           filter add chain=input action=accept protocol=icmp comment="default configuration"
           filter add chain=input action=accept connection-state=established in-interface=ether1-gateway comment="default configuration"
           filter add chain=input action=accept connection-state=related in-interface=ether1-gateway comment="default configuration"
           filter add chain=input action=drop in-interface=ether1-gateway comment="default configuration"
           nat add chain=srcnat out-interface=ether1-gateway action=masquerade comment="default configuration"
       }
   
       /ip dns {
   	    set allow-remote-requests=yes
   	    static add name=router address=192.168.88.1
       }
   
       /tool mac-server remove [find]
       /tool mac-server add interface=ether2-local-master disabled=no
       /tool mac-server add interface=ether3-local-slave disabled=no
       /tool mac-server add interface=ether4-local-slave disabled=no
       /tool mac-server add interface=ether5-local-slave disabled=no
   
       /tool mac-server mac-winbox disable [find]
       /tool mac-server mac-winbox add interface=ether2-local-master disabled=no
       /tool mac-server mac-winbox add interface=ether3-local-slave disabled=no
       /tool mac-server mac-winbox add interface=ether4-local-slave disabled=no
       /tool mac-server mac-winbox add interface=ether5-local-slave disabled=no
   
       /ip neighbor discovery set [find name=ether1-gateway] discover=no
   }
   
   # these commands are executed if user requests to remove default configuration
   :if ($action = "revert") do={
       /ip firewall {
           :local o [nat find comment="default configuration"]
           :if ([:len $o] != 0) do={ nat remove $o }
   
           :local o [filter find comment="default configuration"]
           :if ([:len $o] != 0) do={ filter remove $o }
       }
   
       :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={
           :local o [/ip dhcp-server network find comment="default configuration"]
           :if ([:len $o] != 0) do={ /ip dhcp-server network remove $o }
   
           :local o [/ip dhcp-server find name="default" address-pool="default-dhcp" interface=ether2-local-master !disabled]
           :if ([:len $o] != 0) do={ /ip dhcp-server remove $o }
   
           /ip pool {
               :local o [find name=default-dhcp ranges=192.168.88.10-192.168.88.254]
               :if ([:len $o] != 0) do={ remove $o }
           }
   
           :local o [/ip dhcp-client find comment="default configuration"]
           :if ([:len $o] != 0) do={ /ip dhcp-client remove $o }
       }
   
       /ip dns {
       	set allow-remote-requests=no
           :local o [static find name=router address=192.168.88.1]
           :if ([:len $o] != 0) do={ static remove $o }
       }
   
       /ip address {
           :local o [find comment="default configuration"]
           :if ([:len $o] != 0) do={ remove $o }
       }
   
       /tool mac-server remove [find]
       /tool mac-server add interface=all disabled=no
   
       /tool mac-server mac-winbox remove [find interface!=all]
       /tool mac-server mac-winbox set [find] disabled=no 
   
       /ip neighbor discovery set [find name=ether1-gateway] discover=yes
   
       /interface ethernet set ether3-local-slave master-port=none
       /interface ethernet set ether4-local-slave master-port=none
       /interface ethernet set ether5-local-slave master-port=none
   
       /interface set ether1-gateway name=ether1
       /interface set ether2-local-master name=ether2
       /interface set ether3-local-slave name=ether3
       /interface set ether4-local-slave name=ether4
       /interface set ether5-local-slave name=ether5
   }
Herramientas personales