Diferencia entre revisiones de «Mikrotik RouterBoard 750»
De Guifi.net - Wiki Hispano
m (Revertidos los cambios de 91.200.14.96 (disc.) a la última edición de 173.208.185.50) |
|||
Línea 1: | Línea 1: | ||
− | + | {{en desarrollo}} | |
− | + | ||
− | + | == Configuración por defecto == | |
− | + | #| ether1 is renamed ether1-gateway, rest of interfaces are switched | |
+ | #| IP address 192.168.88.1/24 is on switch | ||
+ | #| DHCP client is on ether1-gateway | ||
+ | #| DHCP server is on switch, with address pool 192.168.88.10-192.168.88.254 | ||
+ | #| masquerade on ether1-gateway | ||
+ | :global action | ||
+ | |||
+ | # these commands are executed after installation or configuration reset | ||
+ | :if ($action = "apply") do={ | ||
+ | /interface set ether1 name=ether1-gateway | ||
+ | /interface set ether2 name=ether2-local-master | ||
+ | /interface set ether3 name=ether3-local-slave | ||
+ | /interface set ether4 name=ether4-local-slave | ||
+ | /interface set ether5 name=ether5-local-slave | ||
+ | |||
+ | /interface ethernet set ether3-local-slave master-port=ether2-local-master | ||
+ | /interface ethernet set ether4-local-slave master-port=ether2-local-master | ||
+ | /interface ethernet set ether5-local-slave master-port=ether2-local-master | ||
+ | |||
+ | /ip address add address=192.168.88.1/24 interface=ether2-local-master comment="default configuration" | ||
+ | |||
+ | :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={ | ||
+ | /ip dhcp-client add interface=ether1-gateway disabled=no comment="default configuration"; | ||
+ | /ip pool add name=default-dhcp ranges=192.168.88.10-192.168.88.254; | ||
+ | /ip dhcp-server add name=default address-pool=default-dhcp interface=ether2-local-master disabled=no; | ||
+ | /ip dhcp-server network add address=192.168.88.0/24 gateway=192.168.88.1 dns-server=192.168.88.1 comment="default configuration"; | ||
+ | } | ||
+ | |||
+ | /ip firewall { | ||
+ | filter add chain=input action=accept protocol=icmp comment="default configuration" | ||
+ | filter add chain=input action=accept connection-state=established in-interface=ether1-gateway comment="default configuration" | ||
+ | filter add chain=input action=accept connection-state=related in-interface=ether1-gateway comment="default configuration" | ||
+ | filter add chain=input action=drop in-interface=ether1-gateway comment="default configuration" | ||
+ | nat add chain=srcnat out-interface=ether1-gateway action=masquerade comment="default configuration" | ||
+ | } | ||
+ | |||
+ | /ip dns { | ||
+ | set allow-remote-requests=yes | ||
+ | static add name=router address=192.168.88.1 | ||
+ | } | ||
+ | |||
+ | /tool mac-server remove [find] | ||
+ | /tool mac-server add interface=ether2-local-master disabled=no | ||
+ | /tool mac-server add interface=ether3-local-slave disabled=no | ||
+ | /tool mac-server add interface=ether4-local-slave disabled=no | ||
+ | /tool mac-server add interface=ether5-local-slave disabled=no | ||
+ | |||
+ | /tool mac-server mac-winbox disable [find] | ||
+ | /tool mac-server mac-winbox add interface=ether2-local-master disabled=no | ||
+ | /tool mac-server mac-winbox add interface=ether3-local-slave disabled=no | ||
+ | /tool mac-server mac-winbox add interface=ether4-local-slave disabled=no | ||
+ | /tool mac-server mac-winbox add interface=ether5-local-slave disabled=no | ||
+ | |||
+ | /ip neighbor discovery set [find name=ether1-gateway] discover=no | ||
+ | } | ||
+ | |||
+ | # these commands are executed if user requests to remove default configuration | ||
+ | :if ($action = "revert") do={ | ||
+ | /ip firewall { | ||
+ | :local o [nat find comment="default configuration"] | ||
+ | :if ([:len $o] != 0) do={ nat remove $o } | ||
+ | |||
+ | :local o [filter find comment="default configuration"] | ||
+ | :if ([:len $o] != 0) do={ filter remove $o } | ||
+ | } | ||
+ | |||
+ | :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={ | ||
+ | :local o [/ip dhcp-server network find comment="default configuration"] | ||
+ | :if ([:len $o] != 0) do={ /ip dhcp-server network remove $o } | ||
+ | |||
+ | :local o [/ip dhcp-server find name="default" address-pool="default-dhcp" interface=ether2-local-master !disabled] | ||
+ | :if ([:len $o] != 0) do={ /ip dhcp-server remove $o } | ||
+ | |||
+ | /ip pool { | ||
+ | :local o [find name=default-dhcp ranges=192.168.88.10-192.168.88.254] | ||
+ | :if ([:len $o] != 0) do={ remove $o } | ||
+ | } | ||
+ | |||
+ | :local o [/ip dhcp-client find comment="default configuration"] | ||
+ | :if ([:len $o] != 0) do={ /ip dhcp-client remove $o } | ||
+ | } | ||
+ | |||
+ | /ip dns { | ||
+ | set allow-remote-requests=no | ||
+ | :local o [static find name=router address=192.168.88.1] | ||
+ | :if ([:len $o] != 0) do={ static remove $o } | ||
+ | } | ||
+ | |||
+ | /ip address { | ||
+ | :local o [find comment="default configuration"] | ||
+ | :if ([:len $o] != 0) do={ remove $o } | ||
+ | } | ||
+ | |||
+ | /tool mac-server remove [find] | ||
+ | /tool mac-server add interface=all disabled=no | ||
+ | |||
+ | /tool mac-server mac-winbox remove [find interface!=all] | ||
+ | /tool mac-server mac-winbox set [find] disabled=no | ||
+ | |||
+ | /ip neighbor discovery set [find name=ether1-gateway] discover=yes | ||
+ | |||
+ | /interface ethernet set ether3-local-slave master-port=none | ||
+ | /interface ethernet set ether4-local-slave master-port=none | ||
+ | /interface ethernet set ether5-local-slave master-port=none | ||
+ | |||
+ | /interface set ether1-gateway name=ether1 | ||
+ | /interface set ether2-local-master name=ether2 | ||
+ | /interface set ether3-local-slave name=ether3 | ||
+ | /interface set ether4-local-slave name=ether4 | ||
+ | /interface set ether5-local-slave name=ether5 | ||
+ | } | ||
+ | |||
+ | [[Categoría:router]] | ||
+ | |||
+ | [[ca:Mikrotik RouterBoard 750]] | ||
+ | [[eu:Mikrotik RouterBoard 750]] |
Revisión de 23:38 24 nov 2013
Este artículo necesita desarrollarse más. Ampliándolo ayudarás a mejorar Guifi.net.
Tal vez puedas ayudarte con los wikis catalán, o inglés si tienen una página equivalente.
Configuración por defecto
#| ether1 is renamed ether1-gateway, rest of interfaces are switched #| IP address 192.168.88.1/24 is on switch #| DHCP client is on ether1-gateway #| DHCP server is on switch, with address pool 192.168.88.10-192.168.88.254 #| masquerade on ether1-gateway :global action # these commands are executed after installation or configuration reset :if ($action = "apply") do={ /interface set ether1 name=ether1-gateway /interface set ether2 name=ether2-local-master /interface set ether3 name=ether3-local-slave /interface set ether4 name=ether4-local-slave /interface set ether5 name=ether5-local-slave /interface ethernet set ether3-local-slave master-port=ether2-local-master /interface ethernet set ether4-local-slave master-port=ether2-local-master /interface ethernet set ether5-local-slave master-port=ether2-local-master /ip address add address=192.168.88.1/24 interface=ether2-local-master comment="default configuration" :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={ /ip dhcp-client add interface=ether1-gateway disabled=no comment="default configuration"; /ip pool add name=default-dhcp ranges=192.168.88.10-192.168.88.254; /ip dhcp-server add name=default address-pool=default-dhcp interface=ether2-local-master disabled=no; /ip dhcp-server network add address=192.168.88.0/24 gateway=192.168.88.1 dns-server=192.168.88.1 comment="default configuration"; } /ip firewall { filter add chain=input action=accept protocol=icmp comment="default configuration" filter add chain=input action=accept connection-state=established in-interface=ether1-gateway comment="default configuration" filter add chain=input action=accept connection-state=related in-interface=ether1-gateway comment="default configuration" filter add chain=input action=drop in-interface=ether1-gateway comment="default configuration" nat add chain=srcnat out-interface=ether1-gateway action=masquerade comment="default configuration" } /ip dns { set allow-remote-requests=yes static add name=router address=192.168.88.1 } /tool mac-server remove [find] /tool mac-server add interface=ether2-local-master disabled=no /tool mac-server add interface=ether3-local-slave disabled=no /tool mac-server add interface=ether4-local-slave disabled=no /tool mac-server add interface=ether5-local-slave disabled=no /tool mac-server mac-winbox disable [find] /tool mac-server mac-winbox add interface=ether2-local-master disabled=no /tool mac-server mac-winbox add interface=ether3-local-slave disabled=no /tool mac-server mac-winbox add interface=ether4-local-slave disabled=no /tool mac-server mac-winbox add interface=ether5-local-slave disabled=no /ip neighbor discovery set [find name=ether1-gateway] discover=no } # these commands are executed if user requests to remove default configuration :if ($action = "revert") do={ /ip firewall { :local o [nat find comment="default configuration"] :if ([:len $o] != 0) do={ nat remove $o } :local o [filter find comment="default configuration"] :if ([:len $o] != 0) do={ filter remove $o } } :if ([:len [/system package find name="dhcp" !disabled]] != 0) do={ :local o [/ip dhcp-server network find comment="default configuration"] :if ([:len $o] != 0) do={ /ip dhcp-server network remove $o } :local o [/ip dhcp-server find name="default" address-pool="default-dhcp" interface=ether2-local-master !disabled] :if ([:len $o] != 0) do={ /ip dhcp-server remove $o } /ip pool { :local o [find name=default-dhcp ranges=192.168.88.10-192.168.88.254] :if ([:len $o] != 0) do={ remove $o } } :local o [/ip dhcp-client find comment="default configuration"] :if ([:len $o] != 0) do={ /ip dhcp-client remove $o } } /ip dns { set allow-remote-requests=no :local o [static find name=router address=192.168.88.1] :if ([:len $o] != 0) do={ static remove $o } } /ip address { :local o [find comment="default configuration"] :if ([:len $o] != 0) do={ remove $o } } /tool mac-server remove [find] /tool mac-server add interface=all disabled=no /tool mac-server mac-winbox remove [find interface!=all] /tool mac-server mac-winbox set [find] disabled=no /ip neighbor discovery set [find name=ether1-gateway] discover=yes /interface ethernet set ether3-local-slave master-port=none /interface ethernet set ether4-local-slave master-port=none /interface ethernet set ether5-local-slave master-port=none /interface set ether1-gateway name=ether1 /interface set ether2-local-master name=ether2 /interface set ether3-local-slave name=ether3 /interface set ether4-local-slave name=ether4 /interface set ether5-local-slave name=ether5 }